California UST Class C Operator Training
Last Updated 09/2021
English
Full Lifetime Access
Finish in
30 min! Run Time
30 min! Run Time
Made for for
Employees
only
Employees
only
Certificate
of Completion
of Completion
What you'll learn
Chapter 1 - Facility Overview - This chapter provides a basic overview of the primary components of a typical UST facility. These components include the USTs, manways, spill buckets, fuel dispensers, and dispenser nozzles.
Chapter 2 - Monitoring - This chapter emphasizes the components used to monitor a UST facility. Students will learn what an Automatic Tank Gauge (ATG) is and does, how to interpret its alarms and warnings, and what to do in case of an alarm. The role of line leak detectors is also discussed.
Chapter 3 - Environmental - In this chapter, students learn about sensitive receptors, or places where a fuel spill may leave the facility and enter the environment. The chapter also introduces students to the spill kit and its contents, and how to use spill kit components to contain spills threatening sensitive receptors like curb breaks and drains.
Chapter 4 - Fueling Rules - The focus of this chapter is fuel delivery safety. Students will watch a short video on proper fueling procedures. Students also learn about hazards at the fueling point, including smoking, static electricity, leaving a vehicle unattended while fueling, and leaving a vehicle running while fueling.
Chapter 5 - Delivery Procedures - This chapter teaches the student how to supervise a fuel delivery and monitor for problems during a fuel delivery. Additional emphasis is placed on the ATG and on overfill prevention devices like overfill prevention valves and ball float valves. Delivery prohibitions are also addressed.
Chapter 6 - Safety - This chapter covers safety information every Class C Operator needs to respond to emergencies. Included here is a video explaining when and how to use a fire extinguisher. The Emergency Stop and All Stop buttons are identified and discussed.
Chapter 7 - Emergency Situations - This chapter discusses common emergency situations and proper responses to them, including what to do if a vehicle leaves the facility with the nozzle still in the vehicle's fuel spout. Managing customer traffic in the event of a spill is also covered. Correct fire extinguisher operation is reviewed.
Chapter 8 - Orientation Checklist - This orientation is to be performed by a manager or Class A/B operator at the Class C operator's facility. It will familiarize the trainee with the various site-specific components of the facility and relate them to the content discussed in the PASS UST Class C Operator Training Course.
Skills covered in this course
Description
At California fuel facilities, the Class C operator is first on the scene during an emergency. This course covers exactly what that role demands.
What this course covers:
- Monitoring tank gauges, alarms, and monitoring equipment
- Immediate response to releases, spills, and overfills
- Seven concise chapters, each followed by a short quiz
- Completing a facility Orientation Checklist during an on-site tour
Most learners finish in about 30 minutes, then complete the checklist with a manager or Class B operator before printing the California Class C certificate.
Table of Contents
Chapter 1 - Facility Overview
Chapter 2 - Monitoring
Chapter 3 - Environmental
Chapter 4 - Fueling Rules
Chapter 5 - Delivery Procedures
Chapter 6 - Safety
Chapter 7 - Emergency Situations
Chapter 8 - Orientation Checklist
System Requirements
See System Requirements in the Coggno Knowledge Base
Author
Practical American Safety Solutions, better (and more easily) known as PASS Training & Compliance, or PASS, was founded in response to the passing of the Energy Policy Act of 2005, when the idea of UST Operator Training was first introduced. We worked closely with many state legislators and regulators to help finalize their laws to meet the federal requirements. We then quickly grew to expand relationships with nearly every US state and territory to become one of the country’s largest providers of UST Operator Training via our web-based learning management system, PASS Training.
As regulations grew and evolved, so did the demand on the time and attention of UST operators. We saw this as an opportunity to even better serve our customers, which lead to the development of our cloud-based compliance manage platform, PASS Tools for Companies, along with our partner-driven service provider network, PASS Tools for Service Providers.
As things continue to change we will always have a finger on the pulse of regulations and compliance in the UST and AST industries, to help ensure that our customers are equipped with everything necessary to easily and effectively do their jobs.
Frequently Asked Questions
This course is designed for employees who need to complete California UST Class C Operator Training training
Yes. This course is designed to meet applicable federal requirements and commonly mandated state standards. Always confirm specific state or industry requirements with your local regulations.
The course takes approximately 30 minutes to complete and can be paused and resumed at any time.
Yes. Learners receive a downloadable certificate upon successful completion, which can be used for compliance records and audits.
Yes. You can assign this course to individuals or groups using Coggno’s LMS, or purchase multiple seats for your team.
Yes. This course can be exported for delivery in most learning management systems (SCORM compatible).
Yes. The course is fully self-paced and available 24/7.
Yes. This course includes a knowledge check to reinforce learning and verify completion.
Learners have lifetime access from the date of purchase.
Yes. A preview is available so you can review the course format and content before purchasing.
Yes. Content is reviewed and updated as regulations and best practices change.
No. This course is not included with the Prime Subscription and must be purchased separately.
Yes. Refund requests can be submitted within 30 days of purchase.
