Your browser is not supported. Please download Mozilla Firefox or Google Chrome browser.

coggno-logo2
Items in Cart: 0 items
Cart Total
Checkout
Filters Applied
  • Tag: Safety
Reset All
Semiconductor Electrical Safety Part 1: Basics of Electrical Safety Course

Semiconductor Electrical Safety Part 1: Basics of Electrical Safety Course

By UL

We all know that electricity can be dangerous. It can even kill! Working around electricity is part of your job, so we want to make sure you have the information you need to stay safe. Take this course to learn about the characteristics of electricity and electrical hazards and how to avoid them. Ideal learners are semiconductor fabrication workers. Objectives: Recall the characteristics of electricity Describe the relationship between current, voltage and resistance as expressed by Ohm's Law Recognize conductors and insulators Define electrical hazards including electrical shock and arc-flash Recall the meaning of electrical hazard signs; Recognize electrical hazards and conditions to avoid Duration: 21 minutes

Visited 113 times
$24.95
Semiconductor Chemical Safety Part 4: Hazardous Gases and Control Systems (US) Course

Semiconductor Chemical Safety Part 4: Hazardous Gases and Control Systems (US) Course

By UL

Hazardous gases used in semiconductor fabrication facilities are typically stored outside of the manufacturing area and piped in to the processing equipment. An accidental release of any gas could cause injury or death. In this course you will learn about the gases used, the hazards they pose and the controls used to protect workers. Ideal learners are semiconductor employees. Objectives: Recall the characteristics of chemical hazard categories Identify the characteristics of hazardous gases used in semiconductor manufacturing Know the physical hazards of compressed gases and the precautions to be used Categorize gases Recognize common controls and determine their use Recall procedures for emergencies involving hazardous gas releases Duration: 17 minutes

Visited 37 times
$24.95
Semiconductor Chemical Safety Part 3: Extremely Hazardous Chemicals (US) Course

Semiconductor Chemical Safety Part 3: Extremely Hazardous Chemicals (US) Course

By UL

There are many extremely hazardous chemical categories in semiconductor fabrication of which you need to be hyper-aware. Take this course to learn about nine of the categories, what they are and what to do in emergencies involving them. Ideal learners are semiconductor employees. Objectives: Recall important information about nine categories of extremely hazardous chemicals found in semiconductor fabrication Duration: 25 minutes

Visited 98 times
$24.95
Semiconductor Chemical Safety Part 2: Hazards, Controls and Emergency Actions Course

Semiconductor Chemical Safety Part 2: Hazards, Controls and Emergency Actions Course

By UL

There are many chemicals you may be exposed to in semiconductor fabrication work. Each chemical has specific characteristics, hazards and safety measures associated with it. Take this course to learn what these chemicals are and how to protect yourself. Ideal learners are semiconductor employees. Objectives: Know about the chemical hazards in semiconductor fabrication facilities Recognize common hazard controls in semiconductor fabrication facilities Recall the initial actions to take during a hazardous chemical emergency Duration: 25 minutes

Visited 93 times
$24.95
Semiconductor Chemical Safety Part 1b: Communication, Controls and Emergency Procedures (US) Course

Semiconductor Chemical Safety Part 1b: Communication, Controls and Emergency Procedures (US) Course

By UL

Employees in the semiconductor industry work with and around hazardous chemicals every day. Take this course to learn about how to store, use and dispose of hazardous chemicals along with steps to take when there is a hazardous chemical event. Ideal learners include semiconductor employees. Objectives: Know Safety Data Sheet (SDS) and label requirements according to the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) Know what controls to use and precautions to take when storing and using hazardous chemicals Know what to do when there is an emergency situation involving hazardous chemicals Know disposal requirements and restrictions for hazardous chemicals Duration: 23 minutes

Visited 64 times
$24.95
Semiconductor Chemical Safety Part 1a: Introduction to the GHS Course

Semiconductor Chemical Safety Part 1a: Introduction to the GHS Course

By UL

Workers in the semiconductor industry work with and around hazardous chemicals every day. Take this course to learn about the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) so you can use these chemicals safely. Ideal learners are semiconductor employees. Objectives: Know what is included in the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) Recognize the characteristics of hazardous materials Recall GHS classifications Duration: 20 minutes  

Visited 107 times
$24.95
Universal Safety Practices (Course)

Universal Safety Practices (Course)

The importance of safety cannot be overstated. Every organization is responsible for the safety of employees while they are working. In 2015, OSHA estimated safety problems cost companies $1 billion a week. Understanding universal safety practices and how to implement them will help keep everyone protected while ensuring the company’s financial security. With our “Universal Safety Practices” workshop, participants will discover how safety affects employee engagement and the bottom line. Safety may seem like a boring topic, but an unsafe work environment cannot be ignored.   Workshop Objectives: Understand the importance and legal responsibilities of safety Perform risks assessments Establish a safety program Monitor safety Communicate safety policies

Visited 48 times
$19.00
Safety in the Workplace (Course)

Safety in the Workplace (Course)

Workplace safety is the responsibility of everyone in an organization. Companies have legal obligations to meet certain safety requirements, but many go further than the minimum obligations. Safety standards and procedures must be put in place, and everyone needs to follow the standards in order for them to be effective. Our Safety In The Workplace course will be instrumental in reviewing common hazards, safety techniques and after completion, participants will have the tools to help them create a Safety policy for your work place. By identifying and anticipating hazards, employers can prevent injuries and keep employees safe. Workshop Objectives:   Define workplace safety. Understand legal responsibilities associated with a safe work environment. Create a safety plan and identify hazards. Recognize the role of management. Develop training procedures. Learn how to implement a safety plan.

Visited 117 times
$19.00
EMC Design/Troubleshooting 7-Pack of Videos (Bundle) - Site License [2017 Webinar Recordings]

EMC Design/Troubleshooting 7-Pack of Videos (Bundle) - Site License [2017 Webinar Recordings]

*Site license holders can share this bundle with up to 10 guests from the same organization.  This Course is from a multi-part series. Below is a description of the complete series. Each of the following parts/sessions can be purchased separately at http://wll.coggno.com/shop: This 7-Pack Bundle includes the following webinars EMC Design/Troubleshooting: Introduction to EMC, EMI, and Troubleshooting [2017 Webinar Recording] (module) EMC Design/Troubleshooting: Important EMI Product Design Concepts [2017 Webinar Recording] (module) EMC Design/Troubleshooting: Radiated Emissions Fundamentals and Pre-Compliance Testing Pt.1 [2017 Webinar Recording] (module) EMC Design/Troubleshooting: Radiated Emissions Fundamentals and Pre-Compliance Testing Pt.2 [2017 Webinar Recording] (module) EMC Design/Troubleshooting: Workbench Immunity Testing and Troubleshooting [2017 Webinar Recording] (module) EMC Design/Troubleshooting: Electrostatic Discharge (ESD) Testing and Troubleshooting [2017 Webinar Recording] (module) EMC Design/Troubleshooting: System Integration of Control Measures Introduction to EMC, EMI, and Troubleshooting Philosophy (45 minutes) Presented by Ken Wyatt We’ll explore some of the basics of EMC, the difference between EMC and EMI, EMC standards, and a systematic approach to resolving EMI issues with products, including the source – path – receptor (victim) model, the four possible coupling paths, and how to organize the information to solve EMI issues quickly. Important EMI Product Design Concepts (1 hour) Presented by Ken Wyatt This module will concentrate more on the fundamentals of EMC and how it applies to product design. We’ll discuss how energy from digital signals move through PC boards, why discontinuous return paths are so bad, differential- versus common-mode currents, coupling paths, proper cable shield termination and pigtails, shielding tips, and hidden antenna-like structures. We’ll follow this with some interesting case studies.  Radiated Emissions Fundamentals and Pre-Compliance Testing (Part 1, 1 hour) Presented by Ken Wyatt We’ll continue with the importance of wavelength, differential mode emissions versus common mode emissions, why high-speed digital signals can cause emissions, analysis of clock harmonics, and measuring emissions. We’ll describe how to start assembling your own EMI troubleshooting kit, along with acquiring low cost spectrum analyzers and probing tools. We’ll show you how to construct your own near field probes and how to use them to identify energy sources and potential coupling paths.  Radiated Emissions Fundamentals and Pre-Compliance Testing (Part 2, 1.5 hours) Presented by Ken Wyatt Picking up where we left off in Part 1, the discussion continues with current probes and why they are so important to help diagnose radiated emissions. We’ll show you how to build your own current probes and how to use simple antennas for measuring and troubleshooting emissions. We’ll discuss a simple three-step process for analyzing the source – path – antenna structure that may be causing your product to fail. Finally, we’ll show you how to set up a radiated emissions pre-compliance range at your own facility, along with several selected EMI troubleshooting techniques to help analyze radiated. Workbench Immunity Testing and Troubleshooting (1 hour) Presented by Ken Wyatt We’ll concentrate on radiated immunity, as that is by far the most common of all the immunity issues. Several low-cost broadband and narrow band RF sources will be shown, including low cost walkie-talkies and small pocket-sized frequency synthesizers that have proven themselves as valuable troubleshooting tools. We’ll also briefly cover conducted immunity, electrically fast transient (EFT), and surge testing that can be done in-house. We’ll finish this segment up with the use of low cost TEM cells for both radiated emissions and radiated immunity troubleshooting. Electrostatic Discharge (ESD) Testing and Troubleshooting (1 hour) Presented by Ken Wyatt In this final module we’ll cover ESD testing and troubleshooting. We’ll start off with some basic testing techniques, discuss product design aspects to help control the path of ESD current, show you several low-cost tools to help in the troubleshooting process. We’ll show you how to construct your own ESD detector and follow up with several case studies of some difficult ESD problems.  Integration of Control Measures Presented by Steven Ferguson This session makes use of the design and troubleshooting tutorials presented during this series and adds discussion of implementation. Topics include: Shielding materials and effectiveness along with controlling shield leakage (ventilation, holes, clamshells, and various openings) Component variances and the hidden schematic Gasket implementation for effective treatment of slots and seams Wiring and cable management to avoid filter bypassing and controlling the loop area Filter pin connectors for low speed and high speed signal lines. Transient control – pros and cons of various device types Developing the EMC Control Plan to provide the overall approach for the entire design team and to bring test and production into the product development and manufacturing phase of the product life cycle Ken Wyatt Kenneth Wyatt is president and principal consultant of Wyatt Technical Services LLC, as well as the senior technical editor for Interference Technology Magazine. He has worked in the field of EMC engineering for over 30 years with a specialty in EMI troubleshooting and pre-compliance testing. He is a co-author of the popular EMC Pocket Guide and RFI Radio Frequency Interference Pocket Guide. He also coauthored the book with Patrick André, EMI Troubleshooting Cookbook for Product Designers, with forward by Henry Ott. He is widely published and authored The EMC Blog hosted by EDN.com for nearly three years. Kenneth is a senior member of the IEEE and a longtime member of the EMC Society.  Steven Ferguson  Steven Ferguson is Executive V.P. at Washington Laboratories, Ltd (WLL) and has been working in EMC, Safety, MIL-STD, Nuclear, Energy and related compliance engineering and test for over 35 years at test laboratories and manufacturers. His work includes designing products, developing procedures, performing tests and advising developers on routes and techniques for attaining product compliance. He has been directly involved with EMC design and compliance evaluation for many systems including several power plants (facilities and equipment qualification), hospitals, presidential aircraft, the Space Shuttle and Hubble Space Telescope. He presents various courses on EMI/EMC compliance including EMC for Nuclear Power Facilities, Architectural Shielding and a hands-on course MIL-STD-461 testing at the WLL facility in Maryland and on-site for multiple government and industrial clients. His work also includes EMC, Environmental and Safety evaluations for commercial, military and medical devices and training of hundreds of personnel on test and evaluation techniques. He has authored several papers on equipment qualification and evaluation techniques with presentations at many conferences. He is a member of the TR-102323 Working Group and supported preparation of Revision 4.   About WL Academy, the Electronics Industry's learning resource: From EMC to Product Safety, from Radio Frequency to Compliance and Environmental Design, we can help manufacturers get the compliance training your design and testing engineers and technicians need. The WL Academy specializes in comprehensive webinars, seminars and workshops that combine practical real-world engineering insights and solutions for today's engineering challenges. Taught by experienced engineers, WL Academy Seminars feature two to five day courses in compliance design, engineering, testing and measurement subjects. WL Academy's free workshops provide snapshot training days for current design and testing challenges. We also feature ancillary courses from nationally recognized partners in the electronics testing industry. Let us help your company ease your journey to product compliance. WL Academy Engineering Courses: The WL Academy has a slate of national training courses geared to meeting the demands of today's progressive electronics designs and the needs of the professional engineers who must bring them to market on time and on budget. From the complex military systems to the state of the art ITE, from crucial medical and ever-changing wireless, from unique RF to telecommunications equipment our training suite of courses will help these industry engineers gain the practical training they need in an easy to learn environment. WL Academy instructors are engineers themselves in challenging, fast-paced manufacturing and service industries - they get it. http://wll.com/us/academy/

Visited 165 times
$1,050.00
EMC Design/Troubleshooting 7-Pack of Videos (Bundle) - Single License [2017 Webinar Recordings]

EMC Design/Troubleshooting 7-Pack of Videos (Bundle) - Single License [2017 Webinar Recordings]

This Course is from a multi-part series. Below is a description of the complete series. Each of the following parts/sessions can be purchased separately at http://wll.coggno.com/shop: This 7-Pack Bundle includes the following webinars EMC Design/Troubleshooting: Introduction to EMC, EMI, and Troubleshooting [2017 Webinar Recording] (module) EMC Design/Troubleshooting: Important EMI Product Design Concepts [2017 Webinar Recording] (module) EMC Design/Troubleshooting: Radiated Emissions Fundamentals and Pre-Compliance Testing Pt.1 [2017 Webinar Recording] (module) EMC Design/Troubleshooting: Radiated Emissions Fundamentals and Pre-Compliance Testing Pt.2 [2017 Webinar Recording] (module) EMC Design/Troubleshooting: Workbench Immunity Testing and Troubleshooting [2017 Webinar Recording] (module) EMC Design/Troubleshooting: Electrostatic Discharge (ESD) Testing and Troubleshooting [2017 Webinar Recording] (module) EMC Design/Troubleshooting: System Integration of Control Measures Introduction to EMC, EMI, and Troubleshooting Philosophy (45 minutes) Presented by Ken Wyatt We’ll explore some of the basics of EMC, the difference between EMC and EMI, EMC standards, and a systematic approach to resolving EMI issues with products, including the source – path – receptor (victim) model, the four possible coupling paths, and how to organize the information to solve EMI issues quickly. Important EMI Product Design Concepts (1 hour) Presented by Ken Wyatt This module will concentrate more on the fundamentals of EMC and how it applies to product design. We’ll discuss how energy from digital signals move through PC boards, why discontinuous return paths are so bad, differential- versus common-mode currents, coupling paths, proper cable shield termination and pigtails, shielding tips, and hidden antenna-like structures. We’ll follow this with some interesting case studies.  Radiated Emissions Fundamentals and Pre-Compliance Testing (Part 1, 1 hour) Presented by Ken Wyatt We’ll continue with the importance of wavelength, differential mode emissions versus common mode emissions, why high-speed digital signals can cause emissions, analysis of clock harmonics, and measuring emissions. We’ll describe how to start assembling your own EMI troubleshooting kit, along with acquiring low cost spectrum analyzers and probing tools. We’ll show you how to construct your own near field probes and how to use them to identify energy sources and potential coupling paths.  Radiated Emissions Fundamentals and Pre-Compliance Testing (Part 2, 1.5 hours) Presented by Ken Wyatt Picking up where we left off in Part 1, the discussion continues with current probes and why they are so important to help diagnose radiated emissions. We’ll show you how to build your own current probes and how to use simple antennas for measuring and troubleshooting emissions. We’ll discuss a simple three-step process for analyzing the source – path – antenna structure that may be causing your product to fail. Finally, we’ll show you how to set up a radiated emissions pre-compliance range at your own facility, along with several selected EMI troubleshooting techniques to help analyze radiated. Workbench Immunity Testing and Troubleshooting (1 hour) Presented by Ken Wyatt We’ll concentrate on radiated immunity, as that is by far the most common of all the immunity issues. Several low-cost broadband and narrow band RF sources will be shown, including low cost walkie-talkies and small pocket-sized frequency synthesizers that have proven themselves as valuable troubleshooting tools. We’ll also briefly cover conducted immunity, electrically fast transient (EFT), and surge testing that can be done in-house. We’ll finish this segment up with the use of low cost TEM cells for both radiated emissions and radiated immunity troubleshooting. Electrostatic Discharge (ESD) Testing and Troubleshooting (1 hour) Presented by Ken Wyatt In this final module we’ll cover ESD testing and troubleshooting. We’ll start off with some basic testing techniques, discuss product design aspects to help control the path of ESD current, show you several low-cost tools to help in the troubleshooting process. We’ll show you how to construct your own ESD detector and follow up with several case studies of some difficult ESD problems.  Integration of Control Measures Presented by Steven Ferguson This session makes use of the design and troubleshooting tutorials presented during this series and adds discussion of implementation. Topics include: Shielding materials and effectiveness along with controlling shield leakage (ventilation, holes, clamshells, and various openings) Component variances and the hidden schematic Gasket implementation for effective treatment of slots and seams Wiring and cable management to avoid filter bypassing and controlling the loop area Filter pin connectors for low speed and high speed signal lines. Transient control – pros and cons of various device types Developing the EMC Control Plan to provide the overall approach for the entire design team and to bring test and production into the product development and manufacturing phase of the product life cycle Ken Wyatt Kenneth Wyatt is president and principal consultant of Wyatt Technical Services LLC, as well as the senior technical editor for Interference Technology Magazine. He has worked in the field of EMC engineering for over 30 years with a specialty in EMI troubleshooting and pre-compliance testing. He is a co-author of the popular EMC Pocket Guide and RFI Radio Frequency Interference Pocket Guide. He also coauthored the book with Patrick André, EMI Troubleshooting Cookbook for Product Designers, with forward by Henry Ott. He is widely published and authored The EMC Blog hosted by EDN.com for nearly three years. Kenneth is a senior member of the IEEE and a longtime member of the EMC Society.  Steven Ferguson  Steven Ferguson is Executive V.P. at Washington Laboratories, Ltd (WLL) and has been working in EMC, Safety, MIL-STD, Nuclear, Energy and related compliance engineering and test for over 35 years at test laboratories and manufacturers. His work includes designing products, developing procedures, performing tests and advising developers on routes and techniques for attaining product compliance. He has been directly involved with EMC design and compliance evaluation for many systems including several power plants (facilities and equipment qualification), hospitals, presidential aircraft, the Space Shuttle and Hubble Space Telescope. He presents various courses on EMI/EMC compliance including EMC for Nuclear Power Facilities, Architectural Shielding and a hands-on course MIL-STD-461 testing at the WLL facility in Maryland and on-site for multiple government and industrial clients. His work also includes EMC, Environmental and Safety evaluations for commercial, military and medical devices and training of hundreds of personnel on test and evaluation techniques. He has authored several papers on equipment qualification and evaluation techniques with presentations at many conferences. He is a member of the TR-102323 Working Group and supported preparation of Revision 4.   About WL Academy, the Electronics Industry's learning resource: From EMC to Product Safety, from Radio Frequency to Compliance and Environmental Design, we can help manufacturers get the compliance training your design and testing engineers and technicians need. The WL Academy specializes in comprehensive webinars, seminars and workshops that combine practical real-world engineering insights and solutions for today's engineering challenges. Taught by experienced engineers, WL Academy Seminars feature two to five day courses in compliance design, engineering, testing and measurement subjects. WL Academy's free workshops provide snapshot training days for current design and testing challenges. We also feature ancillary courses from nationally recognized partners in the electronics testing industry. Let us help your company ease your journey to product compliance. WL Academy Engineering Courses: The WL Academy has a slate of national training courses geared to meeting the demands of today's progressive electronics designs and the needs of the professional engineers who must bring them to market on time and on budget. From the complex military systems to the state of the art ITE, from crucial medical and ever-changing wireless, from unique RF to telecommunications equipment our training suite of courses will help these industry engineers gain the practical training they need in an easy to learn environment. WL Academy instructors are engineers themselves in challenging, fast-paced manufacturing and service industries - they get it. http://wll.com/us/academy/

Visited 208 times
$700.00
EMC Design/Troubleshooting: Radiated Emissions Fundamentals and Pre-Compliance Testing Pt.1 [2017 Webinar Recording]

EMC Design/Troubleshooting: Radiated Emissions Fundamentals and Pre-Compliance Testing Pt.1 [2017 Webinar Recording]

Radiated Emissions Fundamentals and Pre-Compliance Testing (Part 1, 1 hour) Presented by Ken Wyatt We’ll continue with the importance of wavelength, differential mode emissions versus common mode emissions, why high-speed digital signals can cause emissions, analysis of clock harmonics, and measuring emissions. We’ll describe how to start assembling your own EMI troubleshooting kit, along with acquiring low cost spectrum analyzers and probing tools. We’ll show you how to construct your own near field probes and how to use them to identify energy sources and potential coupling paths.  Presented by Ken Wyatt Kenneth Wyatt is president and principal consultant of Wyatt Technical Services LLC, as well as the senior technical editor for Interference Technology Magazine. He has worked in the field of EMC engineering for over 30 years with a specialty in EMI troubleshooting and pre-compliance testing. He is a co-author of the popular EMC Pocket Guide and RFI Radio Frequency Interference Pocket Guide. He also coauthored the book with Patrick André, EMI Troubleshooting Cookbook for Product Designers, with forward by Henry Ott. He is widely published and authored The EMC Blog hosted by EDN.com for nearly three years. Kenneth is a senior member of the IEEE and a longtime member of the EMC Society.   

Visited 90 times
$125.00
EMC Design/Troubleshooting: Workbench Immunity Testing and Troubleshooting [2017 Webinar Recording]

EMC Design/Troubleshooting: Workbench Immunity Testing and Troubleshooting [2017 Webinar Recording]

Workbench Immunity Testing and Troubleshooting (1 hour) Presented by Ken Wyatt We’ll concentrate on radiated immunity, as that is by far the most common of all the immunity issues. Several low-cost broadband and narrow band RF sources will be shown, including low cost walkie-talkies and small pocket-sized frequency synthesizers that have proven themselves as valuable troubleshooting tools. We’ll also briefly cover conducted immunity, electrically fast transient (EFT), and surge testing that can be done in-house. We’ll finish this segment up with the use of low cost TEM cells for both radiated emissions and radiated immunity troubleshooting. PCB Webinars Presented by Ken Wyatt Kenneth Wyatt is president and principal consultant of Wyatt Technical Services LLC, as well as the senior technical editor for Interference Technology Magazine. He has worked in the field of EMC engineering for over 30 years with a specialty in EMI troubleshooting and pre-compliance testing. He is a co-author of the popular EMC Pocket Guide and RFI Radio Frequency Interference Pocket Guide. He also coauthored the book with Patrick André, EMI Troubleshooting Cookbook for Product Designers, with forward by Henry Ott. He is widely published and authored The EMC Blog hosted by EDN.com for nearly three years. Kenneth is a senior member of the IEEE and a longtime member of the EMC Society. 

Visited 137 times
$125.00
EMC Design/Troubleshooting: System Integration of Control Measures

EMC Design/Troubleshooting: System Integration of Control Measures

Integration of Control Measures Presented by Steven Ferguson This session makes use of the design and troubleshooting tutorials presented during this series and adds discussion of implementation. Topics include: Shielding materials and effectiveness along with controlling shield leakage (ventilation, holes, clamshells, and various openings) Component variances and the hidden schematic Gasket implementation for effective treatment of slots and seams Wiring and cable management to avoid filter bypassing and controlling the loop area Filter pin connectors for low speed and high speed signal lines. Transient control – pros and cons of various device types Developing the EMC Control Plan to provide the overall approach for the entire design team and to bring test and production into the product development and manufacturing phase of the product life cycle System Integration Webinar Presented by Steven Ferguson Steven Ferguson is Executive V.P. at Washington Laboratories, Ltd (WLL) and has been working in EMC, Safety, MIL-STD, Nuclear, Energy and related compliance engineering and test for over 35 years at test laboratories and manufacturers. His work includes designing products, developing procedures, performing tests and advising developers on routes and techniques for attaining product compliance. He has been directly involved with EMC design and compliance evaluation for many systems including several power plants (facilities and equipment qualification), hospitals, presidential aircraft, the Space Shuttle and Hubble Space Telescope. He presents various courses on EMI/EMC compliance including EMC for Nuclear Power Facilities, Architectural Shielding and a hands-on course MIL-STD-461 testing at the WLL facility in Maryland and on-site for multiple government and industrial clients. His work also includes EMC, Environmental and Safety evaluations for commercial, military and medical devices and training of hundreds of personnel on test and evaluation techniques. He has authored several papers on equipment qualification and evaluation techniques with presentations at many conferences. He is a member of the TR-102323 Working Group and supported preparation of Revision 4.

Visited 160 times
$125.00
EMC Design/Troubleshooting: Radiated Emissions Fundamentals and Pre-Compliance Testing Pt.2 [2017 Webinar Recording]

EMC Design/Troubleshooting: Radiated Emissions Fundamentals and Pre-Compliance Testing Pt.2 [2017 Webinar Recording]

Radiated Emissions Fundamentals and Pre-Compliance Testing (Part 2, 1.5 hours) Presented by Ken Wyatt Picking up where we left off in Part 1, the discussion continues with current probes and why they are so important to help diagnose radiated emissions. We’ll show you how to build your own current probes and how to use simple antennas for measuring and troubleshooting emissions. We’ll discuss a simple three-step process for analyzing the source – path – antenna structure that may be causing your product to fail. Finally, we’ll show you how to set up a radiated emissions pre-compliance range at your own facility, along with several selected EMI troubleshooting techniques to help analyze radiated. PCB Webinars Presented by Ken Wyatt Kenneth Wyatt is president and principal consultant of Wyatt Technical Services LLC, as well as the senior technical editor for Interference Technology Magazine. He has worked in the field of EMC engineering for over 30 years with a specialty in EMI troubleshooting and pre-compliance testing. He is a co-author of the popular EMC Pocket Guide and RFI Radio Frequency Interference Pocket Guide. He also coauthored the book with Patrick André, EMI Troubleshooting Cookbook for Product Designers, with forward by Henry Ott. He is widely published and authored The EMC Blog hosted by EDN.com for nearly three years. Kenneth is a senior member of the IEEE and a longtime member of the EMC Society. 

Visited 122 times
$125.00
EMC Design/Troubleshooting: Introduction to EMC, EMI, and Troubleshooting [2017 Webinar Recording]

EMC Design/Troubleshooting: Introduction to EMC, EMI, and Troubleshooting [2017 Webinar Recording]

Introduction to EMC, EMI, and Troubleshooting Philosophy (45 minutes) Presented by Ken Wyatt We’ll explore some of the basics of EMC, the difference between EMC and EMI, EMC standards, and a systematic approach to resolving EMI issues with products, including the source – path – receptor (victim) model, the four possible coupling paths, and how to organize the information to solve EMI issues quickly. PCB Webinars Presented by Ken Wyatt Kenneth Wyatt is president and principal consultant of Wyatt Technical Services LLC, as well as the senior technical editor for Interference Technology Magazine. He has worked in the field of EMC engineering for over 30 years with a specialty in EMI troubleshooting and pre-compliance testing. He is a co-author of the popular EMC Pocket Guide and RFI Radio Frequency Interference Pocket Guide. He also coauthored the book with Patrick André, EMI Troubleshooting Cookbook for Product Designers, with forward by Henry Ott. He is widely published and authored The EMC Blog hosted by EDN.com for nearly three years. Kenneth is a senior member of the IEEE and a longtime member of the EMC Society. 

Visited 110 times
$125.00
EMC Design/Troubleshooting: Important EMI Product Design Concepts [2017 Webinar Recording]

EMC Design/Troubleshooting: Important EMI Product Design Concepts [2017 Webinar Recording]

Important EMI Product Design Concepts (1 hour) Presented by Ken Wyatt This module will concentrate more on the fundamentals of EMC and how it applies to product design. We’ll discuss how energy from digital signals move through PC boards, why discontinuous return paths are so bad, differential- versus common-mode currents, coupling paths, proper cable shield termination and pigtails, shielding tips, and hidden antenna-like structures. We’ll follow this with some interesting case studies.  PCB Webinars Presented by Ken Wyatt Kenneth Wyatt is president and principal consultant of Wyatt Technical Services LLC, as well as the senior technical editor for Interference Technology Magazine. He has worked in the field of EMC engineering for over 30 years with a specialty in EMI troubleshooting and pre-compliance testing. He is a co-author of the popular EMC Pocket Guide and RFI Radio Frequency Interference Pocket Guide. He also coauthored the book with Patrick André, EMI Troubleshooting Cookbook for Product Designers, with forward by Henry Ott. He is widely published and authored The EMC Blog hosted by EDN.com for nearly three years. Kenneth is a senior member of the IEEE and a longtime member of the EMC Society. 

Visited 135 times
$125.00
EMC Design/Troubleshooting: Electrostatic Discharge (ESD) Testing and Troubleshooting [2017 Webinar Recording]

EMC Design/Troubleshooting: Electrostatic Discharge (ESD) Testing and Troubleshooting [2017 Webinar Recording]

Electrostatic Discharge (ESD) Testing and Troubleshooting (1 hour) Presented by Ken Wyatt In this final module we’ll cover ESD testing and troubleshooting. We’ll start off with some basic testing techniques, discuss product design aspects to help control the path of ESD current, show you several low-cost tools to help in the troubleshooting process. We’ll show you how to construct your own ESD detector and follow up with several case studies of some difficult ESD problems. Plus video demos! PCB Webinars Presented by Ken Wyatt Kenneth Wyatt is president and principal consultant of Wyatt Technical Services LLC, as well as the senior technical editor for Interference Technology Magazine. He has worked in the field of EMC engineering for over 30 years with a specialty in EMI troubleshooting and pre-compliance testing. He is a co-author of the popular EMC Pocket Guide and RFI Radio Frequency Interference Pocket Guide. He also coauthored the book with Patrick André, EMI Troubleshooting Cookbook for Product Designers, with forward by Henry Ott. He is widely published and authored The EMC Blog hosted by EDN.com for nearly three years. Kenneth is a senior member of the IEEE and a longtime member of the EMC Society. 

Visited 82 times
$125.00
Product Safety 6-Pack of Videos (Bundle) - Site License [2017 Webinar Recordings]

Product Safety 6-Pack of Videos (Bundle) - Site License [2017 Webinar Recordings]

*Site license holders can share this bundle with up to 10 guests from the same organization.  This 6-Pack Bundle includes the following webinars: Product Safety Requirements: Ratings, Markings, Instructions [2017 Webinar Recording] (module) Product Safety Requirements: Electrical Safety [2017 Webinar Recording] (module) Product Safety Requirements: Mechanical Safety [2017 Webinar Recording] (module) Product Safety Requirements: Thermal/Fire Safety [2017 Webinar Recording] (module) Product Safety Requirements: IEC 62368 – Hazard Based Safety [2017 Webinar Recording] (module) Product Safety Requirements: Documents and Ongoing Safety Requirements [2017 Webinar Recording] (module) Ratings, Markings, Instructions – Presented by Steve Ferguson This class serves as the introduction to compliance with product safety standards and the basis for the product evaluation. Proper ratings let the consumer know about demands on their electrical circuit and providing appropriate warnings, cautions and user instructions are critical to the overall use and avoidance of misuse that could produce an unsafe condition. Electrical Safety – Presented by Steve Ferguson This class deals with the various electrical requirements ranging from accessibility limitations to reduce shock hazard risks to application of proper insulation and space between hazardous voltage or energy and the low voltage circuits present in many products. Mechanical Safety – Presented by Steve Ferguson Mechanical requirements are associated with most products ranging from controlling access to moving parts to sharp edges to tip hazards. This class discusses the various aspects associated with mechanical considerations and introduces topics that need consideration in the product development. Thermal/Fire Safety – Presented by Steve Ferguson Electrical circuit operation often results in heat and in the presence of combustion potential for fire. This class examines requirements associated with heat from touch to deterioration of access prevention and containment of fire as appropriate. Sources and prevention of safety risks associated with thermal concerns are discussed. IEC 62368 – Hazard Based Safety – Presented By Mark Maynard IEC 62368-1:2014 incorporates the new Hazard-Based Safety Engineering (HBSE) approach, which helps enable the use of novel and innovative techniques for product designs and incorporation of new technologies. This standard will replace both IEC 60065 and IEC 60950-1, and will be applicable for Audio/Video electronics, Information Technology Equipment (ITE), telecommunications equipment, office appliances, and other specified types of consumer electronics. The European Union will mandate the use of this standard for CE marking in June, 2019, and the North American requirements are expected to apply before the end of this decade. In this webinar, you will learn about: a. HBSE definitions and terminology b. Comparison of performance-based standards to prescriptive standards c. Applicability of requirement elements (electrical, flammability, heat, mechanical, etc.) d. Identifying and quantifying risks e. Requirements associated with safety related topics f. Implementing conditions of acceptability g. Maintaining compliance with parts obsolescence h. Product life implications Documents and Ongoing Safety Requirements – Presented by Steve Ferguson This class outlines the life cycle updates to maintain compliance and the need for production testing on a 100% basis. Keeping records, updating qualification to include replacement parts and responsibilities for self-declaration as well as working with regulatory bodies to maintain listing of the product. Use of approved components is highlighted as a means of control and understanding conditions of acceptability and derating for implementation are integral to this class. Webinar Description International laws dictate that products meet safety standards with a significant emphasis on Electrical Safety. Machinery, Communications Devices, Information Technology, Measuring Equipment, Medical Devices and many other products have specific safety standards prescribing requirements for various elements associated with safety. electrical, thermal, fire, mechanical radiation and other hazards are considered for almost every product that is placed on the market. The webinar series will present details on test and evaluation methods for the more common tests required for international approval. The discussion will address test and evaluation methods along with approaches to incorporate safety control measures into your design. This series offers critical information for product designers, compliance management professionals and testing industry professionals involved with electronic systems development. This multi-part series of one-hour webinars, presented at weekly intervals, provides detailed focus on evaluating products, mitigating issues, documentation and understanding the reason for the requirements. Although the standard provides the basis, this course delves into what and why along with the how. Understanding the evaluation process brings forth items that the designers must consider. Webinar attendees will receive a recording of the presentation and the presentation slides for reference long after the event.  Presenters Steven Ferguson is Executive V.P. at Washington Laboratories, Ltd (WLL) and has been working in EMC, Safety, MIL-STD, Nuclear, Energy and related compliance engineering and test for over 35 years at test laboratories and manufacturers. His work includes designing products, developing procedures, performing tests and advising developers on routes and techniques for attaining product compliance. He has been directly involved with EMC design and compliance evaluation for many systems including several power plants (facilities and equipment qualification), hospitals, presidential aircraft, the Space Shuttle and Hubble Space Telescope. He presents various courses on EMI/EMC compliance including EMC for Nuclear Power Facilities, Architectural Shielding and a hands-on course MIL-STD-461 testing at the WLL facility in Maryland and on-site for multiple government and industrial clients. His work also includes EMC, Environmental and Safety evaluations for commercial, military and medical devices and training of hundreds of personnel on test and evaluation techniques. He has authored several papers on equipment qualification and evaluation techniques with presentations at many conferences. He is a member of the TR-102323 Working Group and supported preparation of Revision 4. Mark Maynard is the Business Development and Communications Manager at ACB Inc. with a shared role supporting Washington Laboratories in the Business and Training arena. He has over 35 years of telecom, information technology, and compliance engineering experience. He also serves as the President of the IEEE Product Safety Engineering Society, is an iNARTE certified Product Safety Engineer, and an IEEE Senior Member. Mark lives in the Austin, Texas area with his wife Lisa, and is a graduate of Texas State University. About WL Academy, the Electronics Industry's learning resource: From EMC to Product Safety, from Radio Frequency to Compliance and Environmental Design, we can help manufacturers get the compliance training your design and testing engineers and technicians need. The WL Academy specializes in comprehensive webinars, seminars and workshops that combine practical real-world engineering insights and solutions for today's engineering challenges. Taught by experienced engineers, WL Academy Seminars feature two to five day courses in compliance design, engineering, testing and measurement subjects. WL Academy's free workshops provide snapshot training days for current design and testing challenges. We also feature ancillary courses from nationally recognized partners in the electronics testing industry. Let us help your company ease your journey to product compliance. WL Academy Engineering Courses: The WL Academy has a slate of national training courses geared to meeting the demands of today's progressive electronics designs and the needs of the professional engineers who must bring them to market on time and on budget. From the complex military systems to the state of the art ITE, from crucial medical and ever-changing wireless, from unique RF to telecommunications equipment our training suite of courses will help these industry engineers gain the practical training they need in an easy to learn environment. WL Academy instructors are engineers themselves in challenging, fast-paced manufacturing and service industries - they get it. http://wll.com/us/academy/

Visited 131 times
$900.00
Product Safety 6-Pack of Videos (Bundle) - Single License [2017 Webinar Recordings]

Product Safety 6-Pack of Videos (Bundle) - Single License [2017 Webinar Recordings]

This 6-Pack Bundle includes the following webinars: Product Safety Requirements: Ratings, Markings, Instructions [2017 Webinar Recording] (module) Product Safety Requirements: Electrical Safety [2017 Webinar Recording] (module) Product Safety Requirements: Mechanical Safety [2017 Webinar Recording] (module) Product Safety Requirements: Thermal/Fire Safety [2017 Webinar Recording] (module) Product Safety Requirements: IEC 62368 – Hazard Based Safety [2017 Webinar Recording] (module) Product Safety Requirements: Documents and Ongoing Safety Requirements [2017 Webinar Recording] (module) Ratings, Markings, Instructions – Presented by Steve Ferguson This class serves as the introduction to compliance with product safety standards and the basis for the product evaluation. Proper ratings let the consumer know about demands on their electrical circuit and providing appropriate warnings, cautions and user instructions are critical to the overall use and avoidance of misuse that could produce an unsafe condition. Electrical Safety – Presented by Steve Ferguson This class deals with the various electrical requirements ranging from accessibility limitations to reduce shock hazard risks to application of proper insulation and space between hazardous voltage or energy and the low voltage circuits present in many products. Mechanical Safety – Presented by Steve Ferguson Mechanical requirements are associated with most products ranging from controlling access to moving parts to sharp edges to tip hazards. This class discusses the various aspects associated with mechanical considerations and introduces topics that need consideration in the product development. Thermal/Fire Safety – Presented by Steve Ferguson Electrical circuit operation often results in heat and in the presence of combustion potential for fire. This class examines requirements associated with heat from touch to deterioration of access prevention and containment of fire as appropriate. Sources and prevention of safety risks associated with thermal concerns are discussed. IEC 62368 – Hazard Based Safety – Presented By Mark Maynard IEC 62368-1:2014 incorporates the new Hazard-Based Safety Engineering (HBSE) approach, which helps enable the use of novel and innovative techniques for product designs and incorporation of new technologies. This standard will replace both IEC 60065 and IEC 60950-1, and will be applicable for Audio/Video electronics, Information Technology Equipment (ITE), telecommunications equipment, office appliances, and other specified types of consumer electronics. The European Union will mandate the use of this standard for CE marking in June, 2019, and the North American requirements are expected to apply before the end of this decade. In this webinar, you will learn about: a. HBSE definitions and terminology b. Comparison of performance-based standards to prescriptive standards c. Applicability of requirement elements (electrical, flammability, heat, mechanical, etc.) d. Identifying and quantifying risks e. Requirements associated with safety related topics f. Implementing conditions of acceptability g. Maintaining compliance with parts obsolescence h. Product life implications Documents and Ongoing Safety Requirements – Presented by Steve Ferguson This class outlines the life cycle updates to maintain compliance and the need for production testing on a 100% basis. Keeping records, updating qualification to include replacement parts and responsibilities for self-declaration as well as working with regulatory bodies to maintain listing of the product. Use of approved components is highlighted as a means of control and understanding conditions of acceptability and derating for implementation are integral to this class. Webinar Description International laws dictate that products meet safety standards with a significant emphasis on Electrical Safety. Machinery, Communications Devices, Information Technology, Measuring Equipment, Medical Devices and many other products have specific safety standards prescribing requirements for various elements associated with safety. electrical, thermal, fire, mechanical radiation and other hazards are considered for almost every product that is placed on the market. The webinar series will present details on test and evaluation methods for the more common tests required for international approval. The discussion will address test and evaluation methods along with approaches to incorporate safety control measures into your design. This series offers critical information for product designers, compliance management professionals and testing industry professionals involved with electronic systems development. This multi-part series of one-hour webinars, presented at weekly intervals, provides detailed focus on evaluating products, mitigating issues, documentation and understanding the reason for the requirements. Although the standard provides the basis, this course delves into what and why along with the how. Understanding the evaluation process brings forth items that the designers must consider. Webinar attendees will receive a recording of the presentation and the presentation slides for reference long after the event.  Presenters Steven Ferguson is Executive V.P. at Washington Laboratories, Ltd (WLL) and has been working in EMC, Safety, MIL-STD, Nuclear, Energy and related compliance engineering and test for over 35 years at test laboratories and manufacturers. His work includes designing products, developing procedures, performing tests and advising developers on routes and techniques for attaining product compliance. He has been directly involved with EMC design and compliance evaluation for many systems including several power plants (facilities and equipment qualification), hospitals, presidential aircraft, the Space Shuttle and Hubble Space Telescope. He presents various courses on EMI/EMC compliance including EMC for Nuclear Power Facilities, Architectural Shielding and a hands-on course MIL-STD-461 testing at the WLL facility in Maryland and on-site for multiple government and industrial clients. His work also includes EMC, Environmental and Safety evaluations for commercial, military and medical devices and training of hundreds of personnel on test and evaluation techniques. He has authored several papers on equipment qualification and evaluation techniques with presentations at many conferences. He is a member of the TR-102323 Working Group and supported preparation of Revision 4. Mark Maynard is the Business Development and Communications Manager at ACB Inc. with a shared role supporting Washington Laboratories in the Business and Training arena. He has over 35 years of telecom, information technology, and compliance engineering experience. He also serves as the President of the IEEE Product Safety Engineering Society, is an iNARTE certified Product Safety Engineer, and an IEEE Senior Member. Mark lives in the Austin, Texas area with his wife Lisa, and is a graduate of Texas State University. About WL Academy, the Electronics Industry's learning resource: From EMC to Product Safety, from Radio Frequency to Compliance and Environmental Design, we can help manufacturers get the compliance training your design and testing engineers and technicians need. The WL Academy specializes in comprehensive webinars, seminars and workshops that combine practical real-world engineering insights and solutions for today's engineering challenges. Taught by experienced engineers, WL Academy Seminars feature two to five day courses in compliance design, engineering, testing and measurement subjects. WL Academy's free workshops provide snapshot training days for current design and testing challenges. We also feature ancillary courses from nationally recognized partners in the electronics testing industry. Let us help your company ease your journey to product compliance. WL Academy Engineering Courses: The WL Academy has a slate of national training courses geared to meeting the demands of today's progressive electronics designs and the needs of the professional engineers who must bring them to market on time and on budget. From the complex military systems to the state of the art ITE, from crucial medical and ever-changing wireless, from unique RF to telecommunications equipment our training suite of courses will help these industry engineers gain the practical training they need in an easy to learn environment. WL Academy instructors are engineers themselves in challenging, fast-paced manufacturing and service industries - they get it. http://wll.com/us/academy/

Visited 100 times
$600.00