Your browser is not supported. Please download Mozilla Firefox or Google Chrome browser.

coggno-logo2
Items in Cart: 0 items
Cart Total
Checkout
Filters Applied
  • Tag: Compression
Reset All
Power Cycle Components/Processes Ideal vs Real Operation Analysis

Power Cycle Components/Processes Ideal vs Real Operation Analysis

The power cycle components/processes (compression, combustion and expansion) are presented in this course material.In the presented power cycle components/processes analysis, air is used as the working fluid. For compression and expansion, the technical performance of mentioned power cycle components/processes for ideal and real operation is presented with a given relationship between pressure and temperature and compression and expansion efficiency. Complete combustion at constant pressure with and without heat loss is presented. Six different fuels (carbon, hydrogen, sulfur, coal, oil and gas) react with air as the oxidant at different stoichiometry values (stoichiometry => 1) and oxidant inlet temperature values. Reactants and combustion products specific enthalpy values change with an increase in the temperature and such enthalpy values are presented in a plot where one can notice the flame temperature definition. Physical properties of basic combustion reactants and products species are presented in an enthalpy vs temperature plot. The combustion technical performance at stoichiometry => 1 conditions is presented knowing the specific enthalpy values for combustion reactants and products, given as a function of temperature.Combustion products composition on both weight and mole basis is given in tabular form and plotted in a few figures. Also, flame temperature, oxidant to fuel ratio and fuel higher heating value (HHV) are presented in tabular form and plotted in a few figures. The provided output data and plots allow one to determine the major combustion performance laws and trends. In this course material, the student gets familiar with the power cycle components/processes, their T - s and h - T diagrams, ideal and real operation and major performance trends.  

Visited 2,192 times
$30.00
Power Cycles and Power Cycle Components/Processes Analysis

Power Cycles and Power Cycle Components/Processes Analysis

The ideal, simple and basic power cycles (Carnot Cycle, Brayton Cycle for both power and propulsion applications, Otto Cycle and Diesel Cycle) and ideal power cycle components/processes (compression, combustion and expansion) are presented in this course material.  In the presented power cycles and power cycle components/process analysis, air is used as the working fluid. For each power cycle thermal efficiency derivation is presented with a simple mathematical approach.  Also, for each power cycle, a T - s diagram and power cycle major performance trends (thermal efficiency, specific power output and power output) are plotted in a few figures as a function of compression ratio, turbine inlet temperature and/or final combustion temperature and working fluid mass flow rate.  It should be noted that this course material does not deal with costs (capital, operational or maintenance). For compression and expansion, the technical performance of mentioned power cycle components/processes is presented with a given relationship between pressure and temperature.  While for combustion, the technical performance at stoichiometric conditions is presented knowing the specific enthalpy values for combustion reactants and products, given as a function of temperature.  This course material provides the compression and expansion T - s diagrams and their major performance trends plotted in a few figures as a function of compression and expansion pressure ratio and working fluid mass flow rate.  For each combustion case considered, combustion products composition on both weight and mole basis is given in tabular form and plotted in a few figures.  Also, flame temperature, stoichiometric oxidant to fuel ratio and fuel higher heating value (HHV) are presented in tabular form and plotted in a few figures.  The provided output data and plots allow one to determine the major combustion performance laws and trends. In this course material, the student gets familiar with the ideal simple and basic power cycles and power cycle components/processes and their T - s and h - T diagrams, operation and major performance trends.

Visited 2,452 times
$20.00
Power Cycles and Power Cycle Components/Processes Ideal vs Real Operation Analysis

Power Cycles and Power Cycle Components/Processes Ideal vs Real Operation Analysis

The simple and basic power cycles (Brayton Cycle, Otto Cycle and Diesel Cycle) and power cycle components/processes (compression, combustion and expansion) are presented in this course material.In the presented power cycles and power cycle components/process analysis, air is used as the working fluid. For each power cycle, the thermal efficiency derivation is presented with a simple mathematical approach.Also, for each power cycle, a T - s diagram and cycle major performance trends (thermal efficiency, specific power output and power output) are plotted in a few figures as a function of compression ratio, turbine inlet temperature and/or final combustion temperature, working fluid mass flow rate and both isentropic compression and expansion efficiency.It should be noted that this course material does not deal with costs (capital, operational or maintenance). For compression and expansion, the technical performance of mentioned power cycle components/processes for ideal and real operation is presented with a given relationship between pressure and temperature and compression and expansion efficiency. Complete combustion at constant pressure with and without heat loss is presented.  Six different fuels (carbon, hydrogen, sulfur, coal, oil and gas) react with air as the oxidant at different stoichiometry values (stoichiometry => 1) and oxidant inlet temperature values. Reactants and combustion products specific enthalpy values change with an increase in the temperature and such specific enthalpy values are presented in a plot where one can notice the flame temperature definition.  Physical properties of basic combustion reactants and products species are presented in a specific enthalpy vs temperature plot. The combustion technical performance at stoichiometry => 1 conditions is presented knowing the specific enthalpy values for combustion reactants and products, given as a function of temperature.Combustion products composition on both weight and mole basis is given in tabular form and plotted in a few figures.  Also, flame temperature, oxidant to fuel ratio and fuel higher heating value (HHV) are presented in tabular form and plotted in a few figures.  The provided output data and plots allow one to determine the major combustion performance laws and trends. In this course material, the student gets familiar with the simple and basic power cycles and power cycle components/processes and their T - s and h - T diagrams, ideal vs real operation and major performance trends.

Visited 2,535 times
$30.00
Power Cycle Components/Processes Analysis

Power Cycle Components/Processes Analysis

The ideal power cycle components/processes (compression, combustion and expansion) are presented in this course material.  In the presented power cycle components/processes analysis, air is used as the working fluid. For compression and expansion, the technical performance of mentioned power cycle components/processes is presented with a given relationship between pressure and temperature.  While for combustion, the technical performance at stoichiometric conditions is presented knowing the specific enthalpy values for combustion reactants and products, given as a function of temperature.  This course provides the compression and expansion T - s diagrams and their major performance trends plotted in a few figures as a function of compression and expansion ratio and working fluid mass flow rate.  For each combustion case considered, combustion products composition on both weight and mole basis is given in tabular form and plotted in a few figures.  Also, flame temperature, stoichiometric oxidant to fuel ratio and fuel higher heating value (HHV) are presented in tabular form and plotted in a few figures.  The provided output data and plots allow one to determine the major combustion performance laws and trends. In this course material, the student gets familiar with the ideal power cycle components/processes, their T - s and h - T diagrams, operation and major performance trends.

Visited 1,041 times
$20.00
Advanced Power Cycle Components/Processes Analysis

Advanced Power Cycle Components/Processes Analysis

The ideal power cycle components/processes (compression, combustion and expansion) are presented in this course material. When dealing with power cycle components/processes (compression and expansion), air, argon, helium and nitrogen are used as the working fluid. When dealing with combustion, six different fuels (carbon, hydrogen, sulfur, coal, oil and gas) react with air and oxygen enriched air as the oxidant at different stoichiometry values (stoichiometry => 1) and oxidant inlet temperature values. For compression and expansion, the technical performance of mentioned power cycle components/processes is presented with a given relationship between pressure and temperature.  While for combustion, the technical performance at stoichiometry => 1 conditions and is presented knowing the specific enthalpy values for combustion reactants and products, given as a function of temperature.  This course material provides the compression and expansion T - s diagrams and their major performance trends plotted in a few figures as a function of compression and expansion pressure ratio and working fluid mass flow rate.  For each combustion case considered, combustion products composition on both weight and mole basis is given in tabular form and plotted in a few figures.  Also, flame temperature, stoichiometric oxidant to fuel ratio and fuel higher heating value (HHV) are presented in tabular form and plotted in a few figures.  The provided output data and plots allow one to determine the major combustion performance laws and trends. In this course material, the student gets familiar with the ideal power cycle components/processes and their T - s and h - T diagrams, operation and major performance trends.

Visited 2,102 times
$25.00
Advanced Power Cycle Components/Processes Analysis CE 3 Hour Quiz

Advanced Power Cycle Components/Processes Analysis CE 3 Hour Quiz

A thirty (30) question quiz for the Power Cycle Components/Processes Analysis course.  This quiz is intended for Professional (Licensed) Engineers and upon successful completion of the quiz, the student will get 3 hours of credit. Furthermore, upon successful quiz completion, Engineering Software will provide a copy of the Course Certificate in a PDF form either in an e-mail directly as an attachment and/or providing a URL for it -- Engineering Software can always mail a copy of the Course Certificate to the student and/or mail it where it needs to go for the record. Note: For Engineering Software quizzes and/or courses hosted by Coggno, students from Florida, Louisiana, New York and North Carolina states should consult their State Licensing Boards for pre-approval of all continuing education. It is the responsibility of the individual learner to be sure that he or she is meeting continuing education requirements for each license and corresponding renewal period! 

Visited 133 times
$90.00
Advanced Power Cycles and Power Cycle Components/Processes Analysis

Advanced Power Cycles and Power Cycle Components/Processes Analysis

The ideal, simple and basic power cycles (Carnot Cycle, Brayton Cycle, Otto Cycle and Diesel Cycle) and ideal power cycle components/processes (compression, combustion and expansion) are presented in this course material. When dealing with power cycles two different approaches are taken with respect to the working fluid.  For Carnot Cycle and Brayton Cycle, air, argon, helium and nitrogen are considered as the working fluid.  For Otto Cycle and Diesel Cycle, only air is used as the working fluid. When dealing with power cycle components/processes (compression and expansion), air, argon, helium and nitrogen are used as the working fluid. When dealing with combustion, six different fuels (carbon, hydrogen, sulfur, coal, oil and gas) react with air and oxygen enriched air as the oxidant at different stoichiometry values (stoichiometry => 1) and oxidant inlet temperature values. For each power cycle thermal efficiency derivation is presented with a simple mathematical approach.  Also, for each power cycle, a T - s diagram and power cycle major performance trends (thermal efficiency, specific power output, power output, combustion products composition on weight and mole basis, specific fuel consumption and stoichiometry) are plotted in a few figures as a function of compression ratio, turbine inlet temperature and/or final combustion temperature and working fluid mass flow rate.  It should be noted that this course material does not deal with costs (capital, operational or maintenance). For compression and expansion, the technical performance of mentioned power cycle components/processes is presented with a given relationship between pressure and temperature.  While for combustion, the technical performance at stoichiometry => 1 conditions is presented knowing the specific enthalpy values for combustion reactants and products, given as a function of temperature.  This course material provides the compression and expansion T - s diagrams and their major performance trends plotted in a few figures as a function of compression and expansion pressure ratio and working fluid mass flow rate.  For each combustion case considered, combustion products composition on both weight and mole basis is given in tabular form and plotted in a few figures.  Also, flame temperature, stoichiometric oxidant to fuel ratio and fuel higher heating value (HHV) are presented in tabular form and plotted in a few figures.  The provided output data and plots allow one to determine the major combustion performance laws and trends. In this course material, the student gets familiar with the ideal simple and basic power cycles, power cycle components/processes and compressible flow components and their T - s and h - T diagrams, operation and major performance trends.

Visited 2,496 times
$30.00