Description
The ideal cycle for a simple diesel engine is the Diesel Cycle. In this course material, the open, simple Diesel Cycle used for stationary power generation and combustion are presented.
For Diesel Cycle, only air is used as the working fluid.
When dealing with combustion, six different fuels (carbon, hydrogen, sulfur, coal, oil and gas) react with air and oxygen enriched air as the oxidant at different stoichiometry values (stoichiometry => 1) and oxidant inlet temperature values.
For Diesel Cycle, thermal efficiency derivation is presented with a simple mathematical approach. The Diesel Cycle is presented in the p - V and T - s diagrams and its major performance trends (thermal efficiency, specific power output, power output, combustion products composition on weight and mole basis, specific fuel consumption and stoichiometry) are plotted in a few figures as a function of compression and cut off ratio values, combustor outlet temperature and some fixed cylinder geometry. It should be noted that this course material does not deal with costs (capital, operational or maintenance).
The combustion technical performance at stoichiometry => 1 conditions is presented knowing the specific enthalpy values for combustion reactants and products, given as a function of temperature. Combustion products composition on both weight and mole basis is given in tabular form and plotted in a few figures. Also, flame temperature, oxidant to fuel ratio and fuel higher heating value (HHV) are presented in tabular form and plotted in a few figures. The provided output data and plots allow one to determine the major combustion performance laws and trends.
Table of Contents
Diesel Cycle
Analysis
Assumptions
Governing Equations
Input Data
Results
Conclusions
Combustion
Analysis
Case Study A
Case Study B
Case Study C
Case Study D
Assumptions
Governing Equations
Input Data
Results
Case Study A
Case Study B
Case Study C
Case Study D
Figures
Conclusions
What you'll learn
In this course, the student gets familiar with the simple Diesel Cycle and combustion as well as their T - s and h - T diagrams
Ideal operation and major performance trends
Engineering Software
His over 35 years engineering experience includes performing analytical modeling and computer modeling of physical properties, power cycles, power cycle components/processes and compressible flow. Also, conducting conceptual design, analysis and evaluation of energy conversion systems for basic and simple power and propulsion cycles.