Description

Building codes in Canada typically require fire alarm systems to be installed in accordance with CAN/ULC-S524, verified in accordance with CAN/ULC-S537 and every year after inspected in accordance with CAN/ULC-S536. The verification procedures outlined in CAN/ULC-S537 ensure the fire alarm system and the various system components were installed properly and are working correctly. Verification takes place when new fire alarm systems are put in place and when additions or modifications are made to existing fire alarm systems.

Over the course of three modules, this training will review key inspection and testing procedures found in the Standard, with a focus on the detailed verification reports found in Appendix C of the Standard itself. These modules will include the following information:

Module One

• Module One begins with an overview of fire alarm systems and the verification process, defining appropriate documentation as well as the verification procedures for field devices and related circuits, data communication links, control units and transponders, and voice communication systems.

Module Two

• Module Two continues by identifying how to verify large scale network systems, power supplies, emergency power supplies, annunciators and sequential displays, remote trouble signal units, printers, and ancillary device circuits.

Module Three

• Module Three finishes by examining the verification procedures for a wide variety of field devices, including those with minimum sound pressure requirements.

*Note that this training is intended for those with some familiarity and practical experience with fire alarm systems, fire alarm system components, and the terms used in this industry.

Duration: 2 hours