Hydrogen Sulfide Safety, Parts 1-2
44 min! Run Time
Employees
only
of Completion
Skills covered in this course
Description
This 2-part course is designed to supplement the training requirements found in the ANSI Z390.1-1995.1 (R2000) Accepted Practices for Hydrogen Sulfide (known as H2S) Safety Training Programs and is intended for use with the initial H2S safety training program. Any worker who has the potential to be exposed to H2S at or above the Threshold Limit Value (of 10 parts per million) in an 8 hour workday must receive this training prior to working in that toxic environment, and refresher courses on an annual basis thereafter. You are required to complete all courses and pass all assessments within this suite in order to receive the stated CEU Credits.
Course Objectives:
Duration: 39 min.
System Requirements
See System Requirements in the Coggno Knowledge Base
Author
Built by safety professionals.
Hydrogen Sulfide Safety, Parts 1-2
Part 2 of this two-part course identifies how you can detect, monitor and protect yourself from hydrogen sulfide (H2S). This course also addresses H2S contingency and emergency response plans.
Course Objectives:
Know the effects of exposure to hydrogen sulfide;Know how hydrogen sulfide can be detected and monitored;Recall how to protect oneself from exposure;Know the contingency and emergency response plans for hydrogen sulfide release;Recall how to rescue a person who has been exposed and what first aid they need
Duration: 18 min.
Attachments:
Frequently Asked Questions
This two-part course supplements the training requirements in ANSI Z390.1-1995.1 (R2000), the Accepted Practices for Hydrogen Sulfide Safety Training Programs.
Any worker who may be exposed to H2S at or above the Threshold Limit Value of 10 parts per million during an 8-hour workday must complete this training first.
Workers who continue working in H2S-exposed environments must take a refresher course on an annual basis after their initial training.
The training is delivered in two parts and is intended for use with an initial H2S safety training program rather than as a standalone refresher.
Both parts of the hydrogen sulfide suite must be finished, each with a passing assessment score, before the CEU credit is issued.
Part 1 of this two-part course describes hydrogen sulfide (known as H2S) and emphasizes the critical rules of H2S safety. Any worker who has the potential to be exposed to H2S at or above the exposure limit must receive this training prior to working in that environment and on an annual basis thereafter.
Course Objectives:
Know what hydrogen sulfide is;Know where hydrogen sulfide is found;Know the properties and characteristics of hydrogen sulfide
Duration: 21 min.