The main objective of this session is to help you prevent back injuries. By the time the session is over, you should be able to: identify causes of back injuries; prevent back injuries; use proper lifting, load carrying, and unloading techniques to help protect your back; and think smart about your back and the importance of keeping it healthy. Duration: 33 minutes
This course will take approximately 23 minutes to complete. This presentation will help you to identify the causes of workplace violence, spot the signs of potential violence, follow required security procedures, respond effectively to violent acts, and recognize and respond to terrorist threats.
This course is presented as a collaborative effort between the StateWide Amateur Hockey Association of Florida (SAHOF), The Tampa Bay Lightning Hockey Club, and the University of South Florida Department of Orthopaedics and Sports Medicine. Support for the development of this course was specifically provided through the generosity of a Growth & Retention Grant administered by SAHOF to the University of South Florida.
This course examines the concepts of Community Policing and the SARA Problem Solving model, and its applicability to tribal communities as a means of addressing prescription drug abuse. This course is offered tuition-free by Lamar Associates-Indian Country Training. This project is supported by Grant Number 2010-CK-WX-K030 awarded by the Office of Community Oriented Policing Services, U.S. Department of Justice. The opinions contained herein are those of the author(s) and do not necessarily represent the official position or policies of the U.S. Department of Justice. References to specific companies, products, or services should not be considered an endorsement by the author(s) or the U.S. Department of Justice. Rather, the references are illustrations to supplement discussion of the issues. Important Notes on Navigation Most of the screens in this training are forwarded by you, the user. If initially you are unable to see the forward button on the bottom of your screen, make sure that your “View” is set to 100% or less in Explorer. Some of the slides require your interaction and you will need to advance by clicking on a forward arrow or submit button inside the slide, rather than on the bottom. A few screens ask that you click on subtitles to view more information. Should you run into any difficulties you cannot resolve, use the Help button on the left to ask a question.
Most manufacturing processes involve chemicals, many of which can be dangerous. By recognizing and using the rules for Hazard Communication, you will be protected from the risks of exposure to toxic chemicals. This Hazard Communications course contains valuable information from OSHA. Maestro's Hazard Communications course is part of a series of beautifully designed, mobile-friendly safety courses. Course Objectives: Recognize importance Identify components of plan List info on MSDS Identify info on labels
This course will take approximately 27 minutes to complete. The main purpose of this session is to help you work safely with or around formaldehyde. By the end of the session, you will be able to: identify the hazards posed by formaldehyde; know how to access information about the hazards posed by formaldehyde and how to control them; understand the toxicological effects of formaldehyde exposure; identify engineering control measures used at the facility to protect workers from the hazards posed by formaldehyde; and know how to protect yourself.
This course will take approximately 29 minutes to complete. This training session discusses lab safety as it relates to the safe handling of flammables and reactives in the lab. By the end of this session you will be able to: identify flammable and reactive hazards in the laboratory, define flammables, reactives, and combustibles, outline safe handling and storage for these materials, discuss methods of prevention, and discuss emergency response measures, safety equipment and evacuation procedures.
This course will take approximately 27 minutes to complete. The main purpose of this session is to help you work safely when you face potential respiratory hazards in the lab.
This course will take approximately 26 minutes to complete. This training session will focus on the general hazards of ionizing radiation and ways to protect yourself from exposure.
This course will take approximately 29 minutes to complete. The main objective of this session is to protect you from being exposed to laser hazards. By the time the session is over, you’ll be able to: identify the primary hazard classes of lasers; identify hazards of operating lasers; work with engineering controls that prevent exposure; implement safe operating procedures; select and wear appropriate personal protective equipment; and report accidents and near misses.
This course will take approximatly 22 minutes to complete. Identify security risks, Understand the facility’s security plan, take proper precautions to prevent security breaches, deal effectively with threats of violence and violent incidents and report security problems and incidents promptly.
This course will take approximately 36 minutes to complete. This training session will help you gain a better understanding of your role as a supervisor in implementing and maintaining chemical hygiene and safety in the laboratory.
This course will take approximately 32 minutes to complete. In this training session, we’ll cover all the basic laboratory safety records you have to maintain concerning the use of hazardous chemicals in the lab.
This course will take approximately 22 minutes to complete. The main purpose of this session is to familiarize laboratory personnel with the basics of PPE use in laboratory work. By the time the session is over, you should be able to: Recognize the benefits of PPE in the laboratory; Identify the items of PPE used in laboratory work; Recognize the importance of using PPE correctly; Learn how to properly care for and maintain your PPE; and consistently use PPE to protect yourself from hazards.
This course will take approximately 33 minutes to complete. This session has several related objectives. By the time the session is over, you should be able to: recognize the importance of hazard identification and its function in the risk assessment process; identify the myriad sources of information about hazards in the laboratory; and identify the hazards involved in laboratory operations.
This training session is designed to prepare trainees to become a part of the community of cleanroom workers and do their part to ensure safe operations.
This course will take approximately 23 minutes to complete. The main purpose of this session is to help you work safely when you face potential electrical hazards. By the end of the session, you will be able to: understand why and how electricity can be hazardous to humans; Identify the electrical hazards of laboratory work; recognize the control measures at the facility to protect workers from electrical hazards; and use safety procedures to ensure the safety of everyone at your facility.
This course will take approximately 33 minutes to complete. The main objective of this session is to make sure that you have the knowledge you need to work safely in the laboratory.
This course will take approximately 30 minutes to complete. This training session will introduce you to the hazards of wastes and the methods you can use to make sure that safety is not compromised in any operations involving these materials.
This course will take approximately 23 minutes to complete. The main objective of this session is to tell you about the hazards of chemicals used in our laboratory facility, and how to find the information you need to protect yourself and work safely. Including how to Interpret hazard information on labels; access and understand the information in material safety data sheets (MSDSs);and take adequate precautions to protect yourself against chemical hazards.
This course will take approximately 29 minutes to complete. The main purpose of this session is to help you to prevent injuries by practicing sound ergonomics in the workplace. By the end of the session, you will be able to identify the risk factors that may lead to musculoskeletal injuries in the workplace; understand the basic principles of safer work through sound ergonomics; and apply ergonomic principles in laboratory operations and all aspects of your work.
This course will take approximately 27 minutes to complete. This training session focuses on biosafety, including the prevention of infections from bloodborne pathogens for laboratory workers.